Unpacking And Inspection - Hernon Ultracure 7 Manual

Hernon Manufacturing ®

Unpacking and Inspection

Upon receipt of the unit, carefully remove the contents from the boxes and check for damage. Hernon
is not responsible for damage from shipping – all claims for shipping damage should be made with
carrier.
Check all boxes for contents and document any serial numbers for further reference. You may wish to
retain original shipping cartons in case you need to repackage any item for return.
If you observe or experience any problem with your equipment, notify Hernon Customer Support, your
authorized distributor, or your Hernon representative immediately.
NOTE: REPORT ANY SHORTAGE TO HERNON CUSTOMER SERVICE
Phone: (407) 322-4000 Fax: (407) 321-9700 Email: sales@hernon.com
Before continuing with unpacking and installation, please read the following chapters of this manual for
safety recommendations and installation, running, and troubleshooting instructions.
CAUTION! Always wear proper (High Intensity UV Blocking) protective goggles or face shield
when working near the front of the unit which emits Ultraviolet light! Note: Reflected UV
light may be harmful.
WARNING! Always observe safety requirements!
CAUTION! Risk of Electrical Shock when cover is removed!
CAUTION! Cover is warm to the touch when unit is in operation!
WARNING: DANGEROUS ULTRAVIOLET EMMISSION
107-028 Ultracure 7
4 | P a g e