D-Link D DFL-500 DFL-500 Manual page 28

Select how the firewall should respond when the policy matches a connection attempt. You can
Action
configure the policy to direct the firewall to ACCEPT the connection or DENY the connection. If
you select ACCEPT, you can also configure Authentication for the policy.
Select Log Traffic to write messages to the traffic log whenever the policy processes a
Log Traffic
connection.
Select Authentication and select a user group to require users to enter a user name and
password before the firewall accepts the connection. Select the user group to select the users
that can authenticate with this policy. To add and configure user groups, see
authentication. You must add user groups before you can select authentication.
You can select Authentication for any service. Users can authenticate with the firewall using
HTTP, Telnet, or FTP. For users to be able to authenticate you must add an HTTP, Telnet, or
FTP policy that is configured for authentication. When users attempt to connect through the
Authentication firewall using this policy they are prompted to enter a firewall username and password.
If you want users to authenticate to use other services (for example POP3 or IMAP) you can
create a service group that includes the services for which you want to require authentication as
well as HTTP, Telnet, and FTP. Then users could authenticate with the policy using HTTP,
Telnet, or FTP before using the other service.
In most cases you should make sure that users can use DNS through the firewall without
authentication. If DNS is not available users cannot connect to a web, FTP, or Telnet server using
a domain name.
Enable web filter content filtering for traffic controlled by this policy. You can select Web filter if
Service is set to ANY or HTTP, or to a service group that includes the HTTP service.
For web filter content filtering to take effect, you must configure web content filtering. See
Web filter
content
You can select show settings to display the current web filter content filtering settings for the DFL-
500 NPG.
•
Select OK to add the policy.
The policy is added to the selected policy list.
•
Arrange policies in the policy list so that they have the results that you expect.
Arranging policies in a policy list is described in
DFL-500 User Manual
filtering.
Configuring policy lists.
Users and
Web
28