Download Print this page



   Related Manuals for D-Link DFL-260E

   Summary of Contents for D-Link DFL-260E

  • Page 2: About This Guide

    If any item is missing or damaged, please contact your local D-Link reseller for a replacement. Figure 2 – Mount DFL-260E / 860E in the rack or chassis - One (1) DFL-260E or DFL-860E NetDefend Firewall Appliance...

  • Page 3: Product Overview

    Note: If you would like to turn the device off and on again, we recommend waiting a few seconds between shutting it down and powering it back on. Figure 3. Plugging DFL-260E / 860E into an outlet Name Status - Description Power Light Off - Device is powered off.

  • Page 4

    All LAN Port Static IP Enable the DFL-260E/860E. If this is the case, either Table 3. Default Interface Assignment disconnect the DFL-260E/860E from the router and change the management IP address of the Note: D-Link NetDefend Firewalls only allow Web...

  • Page 5

    Figure 6. Browser Address 2. A RJ-45-to-DB9 RS-232 cable with female connector. (included in the Note: DFL-260E/860E allows either HTTP or a package) secure HTTPS connections from any management host. However, for security reasons, only a secure 3. If your Laptop or PC does not have a RS-232 HTTPS connection is allowed by default.

  • Page 6

    Firewall, and tighten the captive worldwide offices listed in the appendix of the User retaining screws. Manual or online. To learn more about D-Link security product products, please visit the website 2. Connect the other end of the cable to a

  • Page 7


  • Page 8

    Ver. 1.00 2010/08/27 29072600DF260E0...

This manual also for:


Comments to this Manuals

Symbols: 0
Latest comments: