Handset Display; Recall Feature - Panasonic KX-TCD410ALM Service Manual

You can lock the handset dialling buttons. You cannot make any dialling if key lock is on. Only
incoming calls are accepted while the key lock is on. The key lock is cancelled if the handset is turned
off.
When the key lock is on, emergency calls cannot be made until key lock is cancelled.
- is displayed (Refer to
locked.

6.6. Recall Feature

RECALL is used to access special telephone services. Contact your Network provider for details. If
your unit is connected to a PBX, pressing RECALL allows you to access some features of your host
PBX such as transferring an extension call.
- Users in Australia can access Telstra's "EASY CALL" service by having
the recall time set at 100 msec (this is the factory default setting), and
then follow Telstra's "EASY CALL" instructions to operate this service.
6.7. Dialling Pause for PBX line/long distance service users
A dialling pause is used when a pause in the dialling of the phone number is necessary using a PBX
or accessing a long distance service.
For example, when 0 (line access number) is dialled followed by a pause to access an outside line
through a PBX:
- Entering a pause prevents misdialling when you redial or dial a stored
number.
- Pressing PAUSE once creates one pause. To extend the pause
requirement time, press PAUSE accordingly.

Handset Display

14
()) and all dialling buttons are