Philips AVENT Premium Plus SCF394 Manual page 25

Single/double electric breast pump
Hide thumbs Also See for AVENT Premium Plus SCF394:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Problem
The breast pump is not
charging.
Charging the breast
pump takes a very long
time.
I do not feel any
suction/the suction level
is too low.
The suction of the breast
pump is too strong.
I express little/no milk
when I use my breast
pump.
Solution
-
Only use the adapter supplied.
-
Make sure that the adapter has been inserted correctly into the wall
socket and that the small plug has been inserted correctly into the
motor unit.
-
The breast pump is too cold or too hot for charging. Let the breast
pump acclimatize to room temperature for 30 minutes.
-
If the problem persists, contact the Consumer Care Center via
www.philips.com/support.
-
Only use the adapter supplied.
-
Make sure that the adapter has been inserted correctly into the wall
socket and that the small plug has been inserted correctly into the
motor unit.
-
The breast pump is too cold or too hot. It is recommended to charge
the breast pump at room temperature.
-
If the problem persists, contact the Consumer Care Center via
www.philips.com/support.
-
If possible, try a higher suction level.
-
Check if the silicone diaphragm is assembled correctly (see
'Assembling the breast pump').
-
Check if the white valve is not damaged and assembled correctly (see
'Assembling the breast pump').
-
Check if the other parts of breast pump are intact and assembled
correctly (see 'Assembling the breast pump').
-
Make sure that the pump is positioned correctly on the breast to allow
a seal between breast pump and breast.
-
If you still do not feel any suction, please contact the Consumer Care
Center via www.philips.com/support.
-
If possible, try a lower suction level. When you express for the first
time, start with the default suction level (level 5 in stimulation mode,
level 11 in expression mode) and increase/decrease the level when
needed. During different expression sessions, different levels may feel
most comfortable for you.
-
Make sure that you only use the breast pump parts provided with this
breast pump.
-
Check if the silicone diaphragm is not damaged (does not have small
cracks, holes etc.).
-
If the problem persists, contact the Consumer Care Center via
www.philips.com/support.
-
If you do not feel enough suction, please check Troubleshooting item
'I do not feel any suction/the suction level is too low'.
-
If you are using the Philips Avent breast pump for the first time, you
may need some practice before you are able to express any milk.
More expressing tips can be found on the Philips Avent website
www.philips.com/avent.
English
25

Advertisement

Table of Contents
loading

Table of Contents