Download Print this page

ERICO CADDY CPNAM Series Instruction Sheet

Decking offset clips and box / conduit hangers

Advertisement

Quick Links

CPNAM Series
Decking Offset Clips and Box / Conduit Hangers
Part Number
6MCPNAM
812MCPNAM
16MCPNAM
20MCPNAM
24MCPNAM
Part Number
6MB18CPNAM
812MB18CPNAM
16MB18CPNAM
WARNING:
1. ERICO products shall be installed and used only as indicated in ERICO product instruction sheets and training materials. Instruction sheets are available at
www.erico.com and from your ERICO customer service representative.
2. ERICO products must never be used for a purpose other than the purpose for which they were designed or in a manner that exceeds specified load ratings.
3. All instructions must be completely followed to ensure proper and safe installation and performance.
4. Improper installation, misuse, misapplication or other failure to completely follow ERICO's instructions and warnings may cause product malfunction, property
damage, serious bodily injury and death.
5. Products that are manufactured using spring steel components shall be used only in a non-corrosive indoor environment.
6. All pipe supports, hangers, intermediate components and structural attachments must ONLY be used as described herein and are NEVER to be used for any
other purpose.
NOTE: All load ratings are for static conditions and do not account for dynamic loading such as wind, water or seismic loads, unless otherwise noted.
The customer is responsible for:
a. Conformance to all governing codes.
b. The integrity of structures to which the products are attached, including their capability of safely accepting the loads imposed, as evaluated by a qualified engineer.
c. Using appropriate industry standard hardware as noted above.
SAFETY INSTRUCTIONS:
All governing codes and regulations and those required by the job site must be observed.
Always use appropriate safety equipment such as eye protection, hard hat, and gloves as appropriate to the application.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.
TECHNICAL SUPPORT:
www.erico.com
Part Number
CD0BCPNAM
CD1BCPNAM
CD2BCPNAM
CD2.5BCPNAM
CFS434_C
1 OF 4
© 2010, 2015 ERICO International Corporation
Part Number
CPNAM
Part Number
B18SBT18CPNAM

Advertisement

loading
Need help?

Need help?

Do you have a question about the CADDY CPNAM Series and is the answer not in the manual?

Questions and answers

Summary of Contents for ERICO CADDY CPNAM Series

  • Page 1 ERICO customer service representative. 2. ERICO products must never be used for a purpose other than the purpose for which they were designed or in a manner that exceeds specified load ratings. 3. All instructions must be completely followed to ensure proper and safe installation and performance.
  • Page 2 Decking Offset Clips and Box / Conduit Hangers Hardware not included Part Number CPNAM Static Load Limit 100 lbs [450 N] Note: Static load limits apply to CADDY fasteners only TECHNICAL SUPPORT: www.erico.com CFS434_C 2 OF 4 © 2010, 2015 ERICO International Corporation...
  • Page 3 Part Number CD0BCPNAM CD1BCPNAM CD2BCPNAM Static Load Limit 100 lbs [450 N] CD2.5BCPNAM Note: Static load limits apply to CADDY fasteners only Step 3 Step 1 Step 2 TECHNICAL SUPPORT: www.erico.com CFS434_C 3 OF 4 © 2010, 2015 ERICO International Corporation...
  • Page 4 CADDY fasteners only Step 1 - Attach box with self tapping screws (SMS8). Step 2 - Install conduit in box. Step 3 - Finger snap clips closed around conduit. TECHNICAL SUPPORT: www.erico.com CFS434_C 4 OF 4 © 2010, 2015 ERICO International Corporation...

This manual is also suitable for:

Caddy 6mcpnamCaddy 812mcpnamCaddy 16mcpnamCaddy 20mcpnamCaddy 24mcpnamCaddy cd0bcpnam ... Show all