Detailed Component Operating Instructions - Intellifire ® Ignition - Hearth & Home DVLINEAR36 Owner's Manual

K. Detailed Component Operating
Instructions - IntelliFire
IntelliFire Ignition System
IntelliFire is an energy-saving pilot ignition system for
gas fireplaces and inserts. It provides an ignition flame
only when needed and has a battery backup system that
supplies power to spark the ignition flame in the event of
a power outage.
Intellifire is an intermittent pilot ignition, which is an
electronic system. The term Intermittent is used because
the pilot burner flame is only present when the main
burner is operating. When the main burner is off the pilot
is also off.
NOTICE: Batteries should not be placed in the battery
pack while using the transformer. Remove batteries before
using the transformer, and unplug the transformer before
installing the batteries. Battery polarity must be correct or
module damage will occur.
Appliance ON/OFF:
If an optional remote control or wall control is installed,
it should be used to control the ON/OFF function of the
appliance. Follow instructions included with the installed
control.
16
Ignition
®
Hearth & Home Technologies • DVLINEAR36 Owner Manual • 2569-981 Rev. B • 11/20