Bosch SCD110 Quick Start Manual page 2

EN
Quickstart Guide
A full description is available at:
https://www.bosch-connectivity.com/products/sense-connect-detect
Connecting to the SCD
1. Start the SCD Sensor App. You will find the SCD Sensor App in your
Apple App Store or Google Play free of charge.
2. Activate Bluetooth on your smartphone.
3. To activate the SCD, press the button on the device for 1 to 3 seconds.
4. To find the visible SCDs in range, tap "Search for devices".
5. Choose the SCD and follow the instructions on your smartphone to
finalize pairing.
Configuring the SCD
To configure your app, follow the steps shown in the app.
Convention for Characters
Notice
Only certain characters can be used for an email address and the device name.
f The following characters are permitted: [A-Z][a-z][0-9][@.,;/\|+-*_]
The streaming function transmits sensor values at a fixed rate to the app.
Values can be visualized and recorded in the "View" tab. To start streaming,
select the "Streaming" button.
1 - 3 s
2
The logging function stores raw data in the SCD internal memory. Data can
be later transmitted to the SCD app. To configure and start logging, select the
"Logging" button in the app.
The threshold function monitors the streamed or logged values and triggers
alarms on BLE accordingly, if values are out of a defined range. To configure
the thresholds, go to the "Thresholds" tab.
Transferring data
Connect your smartphone with the SCD using the SCD app. To download
existing data in the SCD, go to the "Logging" tab and select "Download".
Notice Data transfer
f The downloading process may take several minutes. Logging is stopped
in order to proceed with the transfer.
Caution Lithium battery!
The device contains a lithium battery. Handling the battery incorrectly could cause
a fire.
f Read and follow the valid transportation regulations, if necessary.
Notice Forfeiting the warranty!
Opening the casing without authorization could present risks to the user and will
void any warranty.
f Do not open the housing.
3