Craftsman 486.24586 Owner's Manual page 8

STEP 1:
(SEE FIGURE 1) ASSEMBLY
• Assemble the two 5/8" jam nuts halfway onto the two
5/8" x 2" hex bolts. Screw the bolts into the nuts that are
welded to the Sleeve Hitch Lift Assembly. Tighten the
jam nuts against the welded nuts.
• Assemble the Lifting Link to the Sleeve Hitch Lift
Assembly using a 5/8" x 1-3/4" hex bolt and a 5/8"
nylock nut. Use the bottom hole in the Lifting Link (gives
the lowest implement depth setting). Tighten the nut
only until snug. Do not squeeze welded arms together.
LIFTING LINK
5/8" NYLOCK NUT
5/8" JAM NUT
5/8"x 2"
HEX BOLT
FIGURE 1
8
LIFT ASSEMBLY
SteP 2:
•
•
5/8"x 1-3/4"
HEX BOLT
FIGURE 2
(SEE FIGURE 2)
Attach the Sleeve Hitch Lift Assembly to the Sleeve
Hitch Frame Assembly using three 5/8" x 1-3/4" clevis
pins and 3/32" hair cotter pins.
Install the Hitch Pin in the sleeve hitch and secure it
with the 5/32" hair cotter pin.
(3) 3/32" HAIR
COTTER PINS
(3) CLEVIS PINS
Call 1-866-576-8388 for missing parts or assembly help
HITCH PIN
5/32" HAIR
COTTER PIN
DO NOT RETURN TO STORE