Advertisement
SWEEpERS WITH A SINGLE HITCH TUBE
NoTE: The dethatcher attaches to the sweeper's offset
tube. This prevents you from offsetting the sweeper.
• Assemble the four bearings to the two spacers and
then slide each through a clamp.
CLAMP
BEARING
FIGURE 7
• Attach each of the bearing, spacer, and clamp
assemblies to a mount bracket using a 1/2 x 3-1/2" hex
bolt and 1/2" nylock jam nut.
1/2 x 3-1/2" HEX BOLT
FIGURE 8
6
BEARING
SPACER
1/2" NYLOCK
JAM NUT
• Fasten each clamp to the spring mount frame
assembly using one 5/16 x 1-3/8" clevis pin, 5/16"
washer, and 3/32" hair cotter pin.
3/32" HAIR
COTTER PIN
FIGURE 9
• Secure the two mount brackets to the inner holes of the
drawbar offset tube of the sweeper using two 5/16 x
2-1/2" hex bolts and 5/16" nylock nuts.
5/16" x 2-1/2"
HEX BOLT
5/16" NYLOCK NUT
FIGURE 10
• Place the double transport hook onto the sweeper hitch
tube. Lift up the front of the dethatcher and slide it into
the double hooks to secure it in the transport position.
DOUBLE TRANSPORT HOOK
FIGURE 11
Call 1-866-576-8388 for missing parts or assembly help
5/16 x 1-3/8"
CLEVIS PIN
5/16" WASHER
DO NOT RETURN TO STORE
Advertisement
