Haier HAMTSJ86MC/1 Instruction Manual page 32

• If the cable is damaged or to be replaced, the operation must be carried out
the by after-sale agent with dedicated tools to avoid any accidents.
• If the appliance is being connected directly to the mains an omnipolar circuit-breaker must be
installed with a minimum opening of 3mm between contacts.
• The installer must ensure that the correct electrical connection has been
made and that it iscompliant with safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and replaced by authorised technicians only.
The bottom surface and the power cord of the hob are not accessible after installation.
DISPOSAL: Do not
dispose this product as
unsorted municipal waste.
Collection of such waste
separately
for special treatment is
necessary.
This appliance is labeled in compliance with European directive 2012/19/EU for
Waste Electrical and Electronic Equipment (WEEE). By ensuring that this appliance
is disposed of correctly, you will help prevent any possible damage to the
environment and to human health, which might otherwise be caused if it were
disposed of in the wrong way.
The symbol on the product indicates that it may not be treated as normal
household waste. It should be taken to a collection point for the recycling of
electrical and electronic goods.
This appliance requires specialist waste disposal. For further information regarding
the treatment, recover and recycling of this product please contact your local
council, your household waste disposal service, or the shop where you purchased
it.
For more detailed information about treatment, recovery and recycling of this
product, please contact your local city office, your household waste disposal
service or the shop where you purchased the product.
30