Table of Contents
Advertisement
Charge the battery with a battery charger.
For charging the battery, make sure to use the
charger specially designed for MF battery.
Otherwise, the battery may be overcharged
resulting in shortened service life.
Do not remove the cap during charging.
Position the battery with the cap facing upward
during charging.
After charging the battery, install the battery in the
vehicle as follows.
When attaching the wiring harness battery
leads to the battery terminals, observe the cor-
rect polarity.
NOTE:
The terminal bolts and nuts are attached to the
battery.
Pull the seat lock lever and remove the seat.
A: Seat
B: Seat lock lever
1. Set the battery to the box.
2. First connect the + + + + lead to the + + + + positive terminal
of the battery.
3. Cover + + + + terminal with rubber boot.
4. Connect the - - - - lead to the - - - - negative terminal of
the battery.
A: + lead
B: - lead
C: Rubber boot
18
Advertisement
Table of Contents
