Using The Command Module - Actel Silicon Explorer II User Manual

Chapter 2: Silicon Explorer Software

Using the Command Module

Explore the
FPGA
10
The Command module is the interface used to select internal nodes in
the Actel FPGA family. The following sections describe exploring with
the probe.
The following procedures describe how to use the Command module
to examine an Actel FPGA.
To open a probe file:
1. Launch Silicon Explorer. Select Silicon Explorer from the
Designer menu under Programs in the Start menu.
2. Select a Probe (.prb) file to open. Select the Open command
from the File menu. Choose (*.prb) as the File type and double-click
Figure 2-2. Command Module