Silicon Explorer Software - Actel Silicon Explorer II User Manual

Silicon Explorer Software

Status
The Explorer software consists of two components, the Command
module and the Analyze module. The Command module of the
Explore software lists all the observable nets in the FPGA. Use the
Command module to verify that you programmed the correct design in
the FPGA. The Analyze module is an 18-channel logic analyzer that
automatically displays the signals for both probe outputs (and up to 16
additional signals) on the target system.
Signal Name
Figure 2-1. Silicon Explore Window
Zoom Buttons
Bus Control
COM port
2
Trigger Position
Silicon Explorer
Status
9