InCarTec 23-229-NAV Quick Start Manual

23-229-NAV Interface for Honda Civic and CRV (EU) 12-17 with navigation
PLEASE NOTE:
1. The radio select rotary switch on the side of the interface must be adjusted to the proper radio setting before
plugging the interface into the vehicle (see next page for setting chart).
2. The interface comes pre-programmed for all of the vehicles factory SWC functions and does not require
programming unless you wish to re-assign the SWC functions or utilize short press long press dual command
functionality. The SWC can always be restored to default settings by pressing and releasing the program button on
the side of the interface once and waiting 7 seconds for the LED to flash 4 times.
3. Once the factory head unit has been removed you will no longer be able to set the clock or date on the factory
display as this is derived from the factory head unit. The date on the screen can be permanently removed by
disconnecting the batttery to clear the screen's memory. In order to set the clock you will need to reconnect the
vehicles battery at 1:00 as this is the time the screen defaults to once it has been reset.
CONNECTIONS TO VEHILCE
24 Pin
CONNECTONS TO NEW RADIO:
8 Pin (power iso)
OPTIONAL CONNECTIONS TO NEW RADIO:
1X RCA Connection (Subwoofer)
To Subwoofer Output on new radio.
(When fitted)
Connect the 10 Pin molex, small 5 pin connector and 4 pin patch lead to the RP4-HD11 Interface box,
The patch lead is used for Steering Wheel Controls. Connect either the 3.5mm jack or blue/yellow fly lead to the SWC/WR/
24 Pin
Green/White: Phone Button hardwire (see following page)
Remote Input connection on the new radio.
The 23-229-NAV connects to the CAN ignition of EU
models of the Honda Civic and CRV (2012-2017) and
provides ignition output as well as interfacing with
the steering wheel controls and amplifier.
This interface also includes subwoofer retention and
a reverse signal, speed pulse and parking brake
outputs. To retain a reverse camera on these
vehicles, please use part 27-269 (sold seperately)
NOT SUITABLE for retaining steering wheel controls
on Chinese/unbranded head units with 2 wire SWC
interface (KEY1/KEY2)
4x RCA Connections (Speakers)
White: Front Left Grey: Front Right
Green: Rear Left: Purple: Rear Right
Fly Leads:
Red/White: Parking Brake Output
Purple/White: Speedpulse
Green: Reverse Output
IGNORE CONNECTION
(US MODELS ONLY)