Download Print this page

InCarTec 27-559 Quick Manual

Peugeot smeg interface

Advertisement

Quick Links

Website: www.incartec.co.uk
CONTENTS ------------------------------------------------------------------------------------------------------------------------------------------------------------ 1
COMPONENT LIST -------------------------------------------------------------------------------------------------------------------------------------------------- 1
Installation Diagram ---------------------------------------------------------------------------------------------------------------------------------------- 2
Installation Instructions --------------------------------------------------------------------------------------------------------------------------------- 3
Troubleshooting ----------------------------------------------------------------------------------------------------------------------------------------------- 3
Part Number
Component
1
Quadlock T-Lead
2
LVDS Cable
3
Interface
Camera input
4
harness
Peugeot SMEG Interface
Contents
Component List
Image
1
E-Mail: sales@incartec.co.uk
Additional components needed
1 Amp Fuse with an inline holder
Solder/crimp connectors
Heat shrink/ self-amalgamating tape
27-559

Advertisement

loading

Summary of Contents for InCarTec 27-559

  • Page 1 Website: www.incartec.co.uk E-Mail: sales@incartec.co.uk 27-559 Peugeot SMEG Interface Contents CONTENTS ------------------------------------------------------------------------------------------------------------------------------------------------------------ 1 COMPONENT LIST -------------------------------------------------------------------------------------------------------------------------------------------------- 1 INSTALLATION DIAGRAM ---------------------------------------------------------------------------------------------------------------------------------------- 2 INSTALLATION INSTRUCTIONS --------------------------------------------------------------------------------------------------------------------------------- 3 TROUBLESHOOTING ----------------------------------------------------------------------------------------------------------------------------------------------- 3 Component List Part Number Component Image Quadlock T-Lead Additional components needed • 1 Amp Fuse with an inline holder LVDS Cable •...
  • Page 2: Installation Diagram

    Website: www.incartec.co.uk E-Mail: sales@incartec.co.uk Installation diagram Part 4 Ignition live 12V Connect the 4 pin LVDS power OUTPUT Constant 12V cable to the original head power INPUT unit or screen. Reverse trigger INPUT 12V Power to camera Part 2 GROUND...
  • Page 3: Installation Instructions

    Website: www.incartec.co.uk E-Mail: sales@incartec.co.uk Installation Instructions Make sure the vehicle is off with the key removed. Remove the original head unit. The switches need to be set on the interface before the interface (part 3) is powered. Refer to the table above for the correct setting of the switches for the vehicle.