InCarTec 27-557 Manual

27-557—CAMERA INTERFACE FOR VOLVO SENSUS 7"
CARS 2015-2018 V40/60.70 XC 60/XC70 S80L
Set the dip switches
These are on the side of the interface box .
On manual gear cars or for some reason the interface does not recognize the CANbus signal and the
screen does not switch to camera on engaging reverse ,then you can manually switch it by connecting
the orange wire to cars reverse light. And turning pin 8 on. In this instance you will not get any CAN bus
generated guidelines). In some cars pin 8 needs to be on for automatic gears, so start with it off, test for
Installation- Remove the original radio . Follow workshop instructions.
Remove the blue original LVDS cable and quadlock connector from the radio and connect as shown