Smart Zoom; Smart Zoom Settings; Enable Overview Mode - Clarion N.I.C.E. 430 Owner's Manual

Backlight always on
You can choose to have the lights always on.
Smart powersave
You can also initiate this special feature of N.I.C.E 430. When running on battery
Smart Powersave will light up the screen only when you press or tap a button, or if
N.I.C.E 430 has something to show you. After a few seconds the light level
decreases, and after another few seconds the backlight turns off. This helps you
achieve a longer battery life.

5.6.3 Smart Zoom

Smart zoom is a lot more than just a usual automatic zoom.
While navigating a route: when approaching a turn, it will zoom in and raise the
view angle to let you easily recognize your maneuver at the next junction. If the next
turn is at a distance, it will zoom out and lower the view angle to be flat in order to let
you see the road in front of you, or it can even switch to an Overview mode to let you
follow your position on the map.
While cruising: if there is no active route and you are just driving, Smart Zoom will
zoom in if you drive slowly and zoom out to the limit set here when you drive at high
speed.
These automatic features can be set up on this screen.

5.6.3.1 Smart Zoom settings

You can set how close Smart Zoom can zoom in when approaching the next turn
(Zoom-in limit), and the maximum zoom level to zoom out when the next turn is
further away (Zoom-out limit). The default values are set to be optimal in most cases.

5.6.3.2 Enable Overview mode

You can configure how the Overview mode is triggered when the next turn is at a
distance.
The Route event distance will determine when N.I.C.E 430 switches to the Overview
or back to the Navigation view.
74