1. Turn on your computer. Reset Charge indicator 2. Plug in the mini-USB end of the Universal Serial Bus (USB) cable to the USB connector on the bottom edge of the N.I.C.E. 430. Head- Mini-USB Connector/TMC phones 3. Plug the other end into a USB port on your computer. The charge indicator glows red, indicating the battery is charging.
2. Remove the stylus from its storage compartment. Selecting the language and setting the time Charge These steps are required the fi rst time you use the N.I.C.E. 430. indicator 1. Tap Settings > Language. The Switch Language screen appears.
2. If mounting on the dashboard, remove the backing on the mounting pad and attach the pad to the dashboard. If mounting on the You may use the N.I.C.E. 430 to navigate while you drive by mounting it windshield, you don’t need the mounting pad.
Current date and time Battery charge connector on the bottom edge of the N.I.C.E. 430. 2. Tap Destination. The N.I.C.E. 430 displays the Find menu. To cigarette lighter Vehicle charging cable 3. Tap Address or POI (point of interest) and defi ne the location.
To restore the default values for the advanced settings, tap Settings > Active route: Current route. An journey may consist of multiple legs. Advanced > Reset Advanced Settings. Only one can be active. N.I.C.E. 430 N.I.C.E. 430 NICE430QuickReference.indd 10-11 NICE430QuickReference.indd 10-11...
The Secure Digital/MultiMediaCard (SD/MMC) slot on the top of the displayed by returning to the Main menu. N.I.C.E. 430 supports up to a 2 GB SD card (for music and or pictures). 2. Slightly push in on the top edge of the card. The N.I.C.E. 430 Inserting a SD/MMC card releases the card.
Confi rm settings and exit confi rmation Start slide show Tap the thumbnail twice to view selected photo in full screen. To return to the thumbnail view, tap anywhere, then tap Exit. N.I.C.E. 430 N.I.C.E. 430 NICE430QuickReference.indd 14-15 NICE430QuickReference.indd 14-15 2/2/2007 1:03:41 PM...
Pairing with the phone 1. Turn on both the N.I.C.E. 430 and your mobile phone. Backspace to change a number 2. Wait for the phone to pair with the N.I.C.E. 430 or tap Settings > Call history Bluetooth icon > Pair mode.
2. Tap one of the buttons at the top of the screen to display incoming or outgoing calls and missed calls. Receiving a call After pairing, when a call comes in, the N.I.C.E. 430 rings and displays the Incoming Call screen. Increase/decrease volume Exit...