Table of Contents
Advertisement
en Childproof lock
11 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
Notes
¡ You can go to the basic settings → Page 14 to
specify whether you want the option to set the child-
proof lock.
¡ After a power cut, the childproof lock is deactivated.
12 Basic settings
You can configure the basic settings for your appliance to meet your needs.
12.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display
Basic setting
Time display
Signal duration upon completion of a cook-
ing time or timer period
Button tone when pressing a button
Cooling fan run-on time
Waiting time until a setting is applied
Childproof lock can be adjusted
Water hardness
Factory setting (may vary according to model)
1
Only for appliance types with steam function
2
12.2 Changing basic settings
Requirement: The appliance is switched off.
Press and hold the
1.
four seconds.
a The first basic setting appears in the display,
e.g. .
Use the
or
button to change the setting.
2.
3.
Use the
button to switch to the next basic setting.
14
2
button for approximately
11.1 Activating and deactivating the
childproof lock
Requirement: The function selector must be set to the
"Off" position .
To activate the childproof lock, press and hold the
▶
button until
appears in the display.
To deactivate the childproof lock, press and hold
‒
the
button until
Selection
= hide the time
1
= display the time
= 10 seconds
1
= 30 seconds
= 2 minutes
= off
1
= on
= short
= medium
1
= long
= extra long
1
= 3 seconds
= 6 seconds
= 10 seconds
= no
1
= yes
= softened
= soft (up to 1.5 mmol/l)
= medium (1.5–2.5 mmol/l)
= hard (2.5–3.8 mmol/l)
= very hard (above 3.8 mmol/l)
To save the changes, press and hold the
4.
for approx. four seconds.
Note: Following a power failure, the factory basic set-
tings are restored.
12.3 Discarding changes to the basic
settings
Turn the function selector.
▶
a All changes are discarded and not saved.
goes out in the display.
1
button
Advertisement
Table of Contents
