Table of Contents
Advertisement
en Basic operation
7 Basic operation
7.1 Switching on the appliance
Turn the function selector to any position other than
▶
the "Off" position .
a The appliance is switched on.
7.2 Switching off the appliance
Turn the function selector to the "Off" position .
▶
a The appliance is switched off.
7.3 Setting the type of heating and
temperature
Use the function selector to set the type of heating.
1.
Use the temperature selector to set the temperature
2.
or grill setting.
a The appliance starts heating after a few seconds.
8 Rapid heating
To save time, you can use rapid heating to shorten the
preheat time.
Only use rapid heat-up when a temperature of over
100 °C has been set.
After rapid heating, it is best to use the following types
of heating:
¡ 3D hot air
¡ Top/bottom heating
9 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
9.1 Overview of the time-setting options
With the
button, select the different time-setting op-
tions.
Time-setting
Use
option
Timer
The timer can be set independently
of the appliance when it is in opera-
tion. It does not affect the appliance.
Cooking time
If you set a cooking time, operation
of the appliance stops automatically
once this time has elapsed.
10
When your food is ready, switch off the appliance.
3.
Tips
¡ The most suitable type of heating for your food can
be found in the description of the type of heating.
→ "Types of heating and functions", Page 6
¡ You can also set a cooking time and end time on
the appliance.
→ "Time-setting options", Page 10
Changing the type of heating
You can change the type of heating at any time.
Use the function selector to set the required type of
▶
heating.
Changing the temperature
You can change the temperature at any time.
Use the temperature selector to set the required
▶
temperature.
8.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Use the function selector to select rapid heating .
1.
Use the temperature selector to set the required
2.
temperature.
a Rapid heating starts after a few seconds.
a When the rapid heating process ends, an audible
signal sounds and the heating indicator goes out.
Use the function selector to set a suitable type of
3.
heating.
Place the food in the cooking compartment.
4.
Time-setting
Use
option
End time
For the cooking time, you can set the
time at which operation ends. The
appliance starts up automatically so
that it finishes cooking at the re-
quired time.
Time
You can set the time.
9.2 Setting the timer
The timer runs independently of the appliance when it
is in operation. The timer can be set when the appli-
ance is switched on or off, up to 23 hours and 59
minutes. The timer has its own audible signal so that
you can tell whether it is the timer or a cooking time
which has elapsed.
Press the
button repeatedly until
1.
in the display.
Use the
or
button to set the timer duration.
2.
is highlighted
Advertisement
Table of Contents
