Check The Mobile Broadband Internet Connection Status - NETGEAR Orbi NBR750 User Manual

Check the mobile broadband Internet
connection status
You can view information about the mobile broadband Internet connection, including
the 5G/LTE provider, type of service, and signal strength.
To check the mobile broadband Internet connection status:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Click the ADVANCED tab.
5. In the Internet Port pane, click the Connection Status button.
The Mobile Information pop-up window opens and shows the following information:
• Network mode. The broadband network mode, such as 5G or 5G/LTE.
• Band. The 5G/LTE frequency operating band.
• LAC. The location area code of the cellula/r network.
• Cell ID..The ID of the network cell, that is, the cellular tower, to which the router
is connected.
• LAC. The location area code of the cellular network.
• SIM Status. Shows whether the SIM card is ready for operation.
• IMEI. The International Mobile Station Equipment Identity (IMEI), used to identify
the device (that is, the router) on the network .
• IMSI. The International Mobile Subscriber Identity (IMSI), used to identify the
subscriber account (that is, the SIM card) on the network
• System Up Time. The time elapsed since the router was last restarted.
• Roaming State.. Shows whether the router is in its home area or is roaming.
• Connection Status. Shows whether the router is connected.
• IP Address. The IP address that is assigned by the 5G/LTE provider.
Manage Your Network
Orbi 5G WiFi 6 Mesh System
80 User Manual