Automatic Internet Setup - NETGEAR Orbi NBR750 User Manual

access the router, the NETGEAR installation assistant automatically checks to see if your
router can connect to your Internet service.

Automatic Internet Setup

You can set up your router automatically, or you can use a web browser to access the
router and set up your router manually. Before you start the setup process, get your ISP
information and make sure that the computers and devices in the network use the
settings described here.
When your Internet service starts, your Internet service provider (ISP) typically gives you
all the information needed to connect to the Internet. If you cannot locate this information,
ask your ISP to provide it. When your Internet connection is working, you no longer
need to launch the ISP login program on your computer to access the Internet. When
you start an Internet application, your router automatically logs you in.
Installation and basic setup takes about 15 minutes to complete.
To automatically set up your router:
1. Make sure that your WiFi-enabled computer or mobile device is connected to the
router with an Ethernet cable (wired) or wirelessly with the preset security settings
listed on the label.
Note: If you want to change the router's WiFi settings, use a wired connection to
avoid being disconnected when the new WiFi settings take effect.
2. Launch a web browser.
The page that displays depends on whether you accessed the router before:
• The first time that you set up the Internet connection for your router, the browser
goes to orbilogin.com, and the Orbi login page displays.
• If you already set up the Internet connection, enter orbilogin.com in the address
field for your browser to start the installation process.
3. Follow the onscreen instructions.
The router connects to the Internet.
4. If the browser does not display the web page, do the following:
• Make sure that the computer is connected to one of the two LAN Ethernet ports
or over WiFi to the router.
• Make sure that the router is receiving power, and that its Power LED is lit.
• Close and reopen the browser or clear the browser cache.
Connect to the Network and
Access the Router
Orbi 5G WiFi 6 Mesh System
20 User Manual