Download Print this page

Sealey TB18LEDW Manual page 2

2pc wireless led trailer light set

Advertisement

4.1.
TRAILER WIRING CODES (N-TYPE)
4.1.1.
"N" Type
Pin 1
Yellow
Pin 2
Blue
Pin 3
White
Pin 4
Green
Pin 5
Brown
Pin 6
Red
Pin 7
Black
4.2.
Plug the transmitter into the socket on the vehicle.
4.3.
Turn on both the light units. The left hand green light bar (on the battery indicator) will flash when the unit has been switched on.
4.4.
Start the vehicle and turn on the hazard lights.
fig.1
5. OPERATION
WARNING! When the red light on the low battery indicator is flashing charge the light.
5.1.
PAIRING THE DEVICE
5.1.1.
Hold down the pairing button for 5 seconds. The right hand orange light (on the battery indicator) will illuminate when pairing is in
progress. The light will go out when pairing is complete.
NOTE:
Always charge the lights to full before any long distance travel.
fig.2
© Jack Sealey Limited
Left hand direction indicator lamp
Rear fog lamp/lamps
Common return (earth)
Right hand direction indicator lamp
Right hand tail lamp/ Rear registration lamp
Rear stop lamps
Left hand tail lamp/ Rear registration lamp
Original Language Version
fig.3
TB18LEDW Issue 1 23/06/2021

Advertisement

loading