Sealey ARB120.V3 Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
1. SAFETY
DO NOT use the roof bars if any parts are missing or damaged as this may cause failure or possible personal injury.

WARNING! Owing to the variety in design of vehicles it is the user's full responsibility to ensure no damage occurs whilst using these

roof bars. Correct attachment to a vehicle is therefore critical and is beyond control of the manufacturer, distributor, or supplier.
WARNING! The user must secure the roof bars properly, checking the security frequently when in use.

WARNING! Avoid any protrusions beyond the side of the car as these may present a risk of injury to passers-by.

DO NOT use the roof bars for any purpose other than for which they are designed.

WARNING! Drive carefully - Be aware of cross winds, sudden braking or hard cornering, reduce speed accordingly when roof bars

are fitted.
WARNING! These roof bars are designed for temporary use only, remove when not in use or before going through a car wash.

Before every use check the bars for security of fittings or any sign of wear and tear. Replace any worn or damaged parts.

Check the load is stable before moving off.

Be cautious of the load height and restrictions of the route(s) you will be taking.

DO NOT exceed the weight limit stated in the specifications or the vehicle handbook, whichever is lower.

WARNING! Remember the driver of the vehicle is responsible for the security and safety of the load carried.

2. INTRODUCTION
Aerodynamic aluminium roof bars to fit onto traditional roof rails, complete with anti-theft locks. Available in two lengths to suit most
vehicles fitted with traditional roof rails up to 58mm wide. Maximum load capacity 90kg.
3. SPECIFICATION
Model No: . . . . . . . . . . . . . . . . . . . . ARB120. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ARB135
Overall Length: . . . . . . . . . . . . . . . . . 1200mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1350mm
Maximum Load Capacity: . . . . . . . . . . . . 90kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90kg
© Jack Sealey Limited
INSTRUCTIONS FOR:
ALUMINIUM ROOF BARS 1200, 1350MM FOR
TRADITIONAL ROOF RAILS 90KG MAX LOAD
ARB120.V3, ARB135.V3
MODEL Nos:
Original Language Version
ARB120.V3, ARB135.V3 Issue:1 13/11/15