K&H Poultry Waterer Unheated Care Instructions

Poultry Waterer,
Care & Instructions

INSTRUCTIONS

1
Fill water reservoir with water.
2
Seat the plastic plug into the hole in cap.
Screw cap snugly onto filled water tank.
3
Be careful not to cross thread.
4
Locate a dry, flat area to place base of
waterer.
5
Set water tank onto base.
The spike in the center of the base will
6
dislodge the plug in the cap of the tank
and automatically the fill water base.
CLEANING & CARE
•
For everyday debris free water,
remove the filter ring and gently tap
or rinse it clean.
•
For re-filling, quickly turn over the
water
discharge will occur if done quickly.
•
Empty contents from tank, rinse and
refill as necessary.
•
Hand wash base with mild detergent.
Rinse thoroughly.
•
Refer to step 1 in the instructions
for use.
reservoir.
K&H Manufacturing, LLC
Colorado Springs, CO
www.khmfg.com | (877) 738-5188
Unheated
Minimal water