K&H Outdoor Kitty House Care Instructions

Outdoor Kitty House
&
Care Instructions
PUTTING TOGETHER YOUR
Outdoor Kitty House
D
Locate the folded roof panel, the main floor with
D
Lay door panels flat and attach clear door flaps if desired using the hook and loop sewn above
the doors. Ad j ust flaps allowing room to ensure free swinging. See Figure 1 .
Raise only one door panel up to meet both side panels and align roof as shown.
Locate zippers. See Figure 2.
I
Zipper Here Figure 2
After zipping, fasten side
flaps securely with hook
and loop sewn along
edges. See Figure 4.
I
41
Figure
D
Locate hook and loop under end roof panels and firmly attach to the tops of the
door end panels. Press firmly for good adhesion.
See Figure 6.
*ff you purchased the heated version, follow instructions on the back for the
(Heated or Unheated)
4
side panel house structure, and the padded floor.
I
Zipper Here
m
If you purchased the heated version, follow instructions on the back to set-up your
heated pad. Next, place your
bottom panel of the house structure prior to closing the second door wall. For the heated pad
onl y , feed the cord through the cord hole. See Figure 5.
I
11
Figure
D
Zip both sides of the roof panel to the
two side walls of the house structure.
See Figure 3.
I I
Figure 3
Zip
here
heated pad or unheated pad into the kitty shelter on the
Cord hole is located in the crease
I I
Figures
I I
Figure 6
patented heated pad.
I