K&H Outdoor Kitty House Care Instructions

Outdoor Kitty House™
Care & Instructions
Thank you for purchasing K&H Manufacturing's Outdoor Kitty House™. When used correctly,
your Outdoor Kitty House™ should provide years of hassle free warmth for your pet. Your Outdoor
Kitty House™ is intended for use indoors and outdoors and is perfect for garages, porches
& barns. The Outdoor Kitty House™ is designed for use with animals only.
If you purchased the heated version - please pay special care to the instructions for the
PUTTING TOGETHER YOUR
Outdoor Kitty House™
Locate the roof panel, the floor with 4 side panel
1
house structure, and the padded floor.
Zip both sides of the roof panel to the two side
2
walls of the house structure. See Figure 1.
3
Raise each end door panel to meet side panels and fasten securely with
hook and loop material sewn along edges. See Figure 2.
4
If you purchased the heated version, follow instructions on the back to
set-up your K&H heated pad.
Place the unheated or heated pad into the kitty shelter on the bottom panel of
the house structure prior to closing the second
door wall. Thread
the cord through
the cord hole.
See Figure 3a - 3c.
Figure 3
5
Locate the hook and loop material under end roof
panels and firmly attach to the tops of the door end
panels. Press firmly for good adhesion.
See Figure 4a.
Clear flap doors can be attached from the inside using
6
the hook and loop material. Adjust door to ensure free
swinging. Press firmly. See Figure 4b.
*
If you purchased the heated version, follow instructions on the back for the K&H patented heated pad.
(Heated or Unheated)
included K&H patented heated pad located on the back.
Figure 1
a
Figure 4
Made in China
K&H Manufacturing, LLC
Colorado Springs, CO
www.khmfg.com | (719) 591-6950
Figure 2
b
a
c
Cord hole is
located
in the crease
b
REV1_01-20- 1 7