Table of Contents
Advertisement
VI. MAINTENANCE
WARNING: IN ORDER TO MAINTAIN SAFE OPERATION IN HAZARDOUS LOCATIONS, THE
INTEGRITY OF THE ALUMINUM CASTING AND THE EPDM SEALS MUST BE MAINTAINED. THE
USER/INSTALLER MUST AVOID INSTALLATIONS WHERE AGGRESSIVE SUBSTANCES MAY BE
PRESENT AND COULD AFFECT THE PERFORMANCE OF THESE MATERIALS. CARE MUST BE
EXCERCISED WHEN REMOVING AND REPLACING THE COVER, SO NO MARRING, SCRATCHING
OR DAMAGE OCCURS TO THE FLANGES.
CAUTION: IF THE UNIT WAS SUPPLIED WITH A GASKET, AVOID FOLDING, CUTTING OR TEARING
THE GASKET. DAMAGING THE GASKET CAN ALLOW MOISTURE TO ENTER THE ENCLOSURE AND
DAMAGER THE UNIT
PREVENTATIVE MAINTENANCE
No scheduled preventative maintenance is required for the Roto-Bin-Dicator
installed correctly. There is no cleaning required for the unit before or during installation.
If the cover is removed after the unit has been in service, it is recommended to replace the gasket to prevent the
ingress of water or dust. At a minimum, the gasket (or o-ring, used in hazardous locations) should be inspected
for folds, cracks and tears.
RECOMMENDED SPARE PARTS
MOUNTING PLATES
Includes H-20 Mounting Gasket
PART NUMBER
MODEL
LAR110130
H-19
LAR110140
H-19SS
LAR110180
H-192
LAR110190
H-192SS
SHAFT COUPLINGS
PART NUMBER
MODEL
LAR110270
H-36
LAR120640
H-38
LAR110275
H-36S
PADDLES
All are stainless steel except model H-373.
PART NUMBER
MODEL
LAR110310
H-370
LAR110360
H-371
LAR110430
H-373
LAR110450
H-374
LAR111037
H-379
LAR111040
H-372A
LAR111200
H-380
note. Consult the manufacturing facility on applications where the housing ambient temperature is above 200º F (93º C).
DESCRIPTION
Mild Steel (Side of Bin)
304 Stainless Steel (Side of Bin)
Mild Steel (Top of Bin)
304 Stainless Steel (To
p of Bin)
DESCRIPTION
Neoprene 3 in. Flexible Shaft; 170º F (77º C) Max Temp
Stainless Steel, 3 in.
Molded Silicone 3 in. Flexible Shaft; 400º F (204º C) Max Temp
DESCRIPTION
4-Vane; 1
/2"x 5" Diameter with Pins
1
4-Vane; 2" x 7" Diameter with Pins
Multiflex; Solid Neoprene 1
/2" x 24" with Pins
1
Multiflex; Stainless Steel 1
/2" x 17" with Pins
1
1-Vane; Insertable with Pins
1-Vane; 1" x 2
/8" with 45º Cut
7
2-Vane Collapsible, Stainless Steel
8
www.bindicator.com
units when properly applied and
®
LAR180212 Rev. E
Advertisement
Table of Contents
