Stihl MS 271 Manual page 70

1
1
: Remove the screws (1) from the
underside of the machine.
1
: Push the handlebar (2) sideways
and pry the AV spring (1) out of its
bearing seat (arrow).
– Take out the screws.
: Ease the handlebar (1) sideways
and take it out of the guide
(arrow).
MS 271 C, MS 291 C
1
: Push the handlebar (1) out of the
lower guide.
– Remove the handlebar (1), check
it and replace if necessary.
2
– Check the annular buffer and
replace it if necessary, b 9.1
Installing
1
: Push the handlebar, buffer (1)
1
first, into the engine housing.
: Push the AV spring (1) into its
seat (2).
: Position the handlebar (1)
against the guide (arrow).
: Ease the handlebar (1) sideways
and place it in the guide (arrow).
– Insert the screws and tighten
them down firmly.
2
1
: Insert and tighten down the
screws (1) firmly.
1
– Reassemble all other parts in the
reverse sequence.
1
1
1
69