Stihl MS 271 Manual page 101

: Remove the fuel hose (1),
b 12.11.2.
1
: Press out the fuel return hose (1)
in direction of tank housing.
2
: Pull out the connector (1) with
fuel return hose (2).
100
1
1
: Pull the connector (1) off the fuel
return hose (2).
: Pry out the grommet (1).
– Replace the fuel return hose.
Check the connector and
grommet and replace if
necessary.
1
1
: Remove the fuel suction
hose (1), b 12.11.2
Installing
2
1
: Install the fuel suction hose (1),
b 12.11.2
1
1
– Use STIHL press fluid to simplify
assembly, b 14
: Fit the grommet (1) in the
hole (arrow) in the fuel tank and
make sure it is properly seated.
1
: Push the connector (1) into the
fuel return hose (2) as far as stop.
MS 271 C, MS 291 C
2