Stihl MS 271 Manual page 26

Installing
– Clean the pivot pins and
disassembled parts, b 14
– Lubricate the pivot pins, b 14
1
3 2
: Push the strap (1), outside
radius (arrow) facing up, onto the
pins (2) and (3).
1
2
: Slip the spacer washer (1) onto
the pin (2).
1
: Hold the brake lever (2) so that
the brake spring attachment
point (arrow) is at the top.
MS 271 C, MS 291 C
: Push the brake lever (2) into the
recess in the hand guard (1) and
line up the holes.
: Fit the brake cable (1) in the
hole (arrow).
1
: Push the hand guard (1) with
brake lever (2) over the machine
until they are positioned against
the pivot pins (arrows).
2
1
1
: Lift the bearing boss of the hand
guard (1) and the brake lever (2)
a little and position them over the
pivot pins (arrows).
2
: Turn the cam lever (1) to one side
until the cam of the hand
guard (arrow) slips passed it.
– Push the hand guard bearing
boss and the brake lever on to
the pivot pins.
: Push the brake cable nipple (1)
into its seat (arrow).
1
1
2
25