Adjusting Microphone Level; Adjusting Headphone Level; Accessing The Control Panel - Shure MVi User Manual

Tap to access the MOTIV equalizer. Equalization changes are displayed in the equalizer image.
EQ persists between preset mode changes.

Adjusting Microphone Level

Select the correct preset mode for your recording application. If you hear distortion or the audio is too low, adjust the micro­
phone level in the audio or sound control panel of your computer or recording device.
Tips:
• Set the microphone level before adjusting headphone volume.
• The headphone volume does not affect the signal level sent to the computer.
• Use the volume slider on the front panel to adjust the microphone gain level.
Note: The microphone gain control is independent of the preset modes. Set your microphone level and experiment with dynamic processing options via
the preset modes.

Adjusting Headphone Level

The headphone monitoring level is affected by the MVi device level and the computer settings level. Raise your computer vol­
ume up and easily adjust headphones through the MVi touch panel headphone control.

Accessing the Control Panel

PC
1. Open the sound control panel and select the Recording tab.
2. Open the Shure MVi device.
3. Under the Levels tab, adjust the volume using the slider.
®
Mac
1. Open the Audio Midi Settings panel.
2. Select the Shure MVi device.
3. Click on Input to adjust the gain using the slider.
Shure Incorporated
9/14