Advertisement
Quick Links
Advertisement
Related Manuals for Trotec BD22
Summary of Contents for Trotec BD22
- Page 1 BD22 OPERATING MANUAL LASER DISTANCE MEASURING DEVICE...
-
Page 2: Table Of Contents
Information marked with this symbol indicates that the Otherwise do not use the device. operating manual must be observed. • Observe the storage and operating conditions (see Technical data). laser distance measuring device BD22... -
Page 3: Information About The Device
The laser distance measuring device BD22 is used to determine Trotec accepts no liability for damages resulting from improper distances, areas and volumes in interior spaces. Indirect use. In such a case, any warranty claims will be voided. measurements (e.g. height measurements of walls or furniture) Any unauthorised modifications, alterations or structural are carried out using the Pythagoras function. - Page 4 Press for a long time: Switching the device Acoustic signal indication on/off Pin dimension measurement 11 Unit/ Press briefly: pin dimension measurement button Press for a long time: change units (m/ft/ft+in/in) 12 + button Request next value in the history laser distance measuring device BD22...
-
Page 5: Transport And Storage
Aborting the measurement and deleting the display suitable bag. 1. Briefly press the C/Off button (10) to abort the current measurement or to delete the displayed measured values one at a time. laser distance measuring device BD22... - Page 6 Press the Unit/ button (11) to return to the pin dimension measuring mode. Briefly press the C/Off button (10) to return to the laser measuring mode. Info It is not possible to save and call up measuring values when performing the pin dimension measuring mode. laser distance measuring device BD22...
- Page 7 • MIN value: determining the perpendicular length to a wall/ floor area • Actual value: marking a defined value for a distance (e.g. a measurement from a ground plan) laser distance measuring device BD22...
- Page 8 ð The second measured value is displayed in the "Indication of measured value 2" (18). ð The line segment to be determined is displayed as result in the lower measurement value display (20). laser distance measuring device BD22...
- Page 9 ð The third measured value is displayed in the "Indication of measured value 3" (19). ð The partial height to be determined is displayed as result in the lower measurement value display (20). laser distance measuring device BD22...
- Page 10 ð The measured line segment is displayed as result in the lower measurement value display (20). Max.10m Info Note down the result. The result will not be saved in the history. 3. Press the C/Off button (10) to return to the laser measuring mode. laser distance measuring device BD22...
-
Page 11: Maintenance And Repair
Trotec customer Repair service. Do not modify the device or install any spare parts. For repairs or device testing, contact the manufacturer. laser distance measuring device BD22... -
Page 12: Disposal
Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators. Please dispose of batteries and accumulators according to the relevant legal requirements. laser distance measuring device BD22... - Page 13 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...