Led Indicators; Dip Switches - Siemens Climatix POL8T1.4X/STD Basic Documentation

Communication cable
(POL0C1.45/STD)
28/30
Siemens
Building Technologies
The RS485 connection is shown as an example.
Note: Accessory POL0C1.45/STD (touch panel-controller communication cable)
has an RJ45 connector. To connect touch panel to Climatix controller
RS485/RS232 port, cut-off plug and connect 3 wires. If a customized cable is used,
ensure that the cable length is less than 3 m.
8.3

LED indicators

The three LED indicators are located on the front of the Climatix touch panel.
Marking Indicator name
Power supply
Operation
Communication
8.4

DIP switches

The DIP switches are located on the back of the Climatix touch panel.
1)
DIP switches (1 – 5)
00000
01000
10000
10100
00100
1)
DIP switch status: ON=1, OFF=0
Climatix touch panel
Technical specifications
Color Mode Description
On Powered on
Green
Off No power
On No detected fault
Yellow
Off CPU fault detected in the device
Flashing Communication in progress
Yellow
Off No communication
Function
Normal operation mode
Setting mode
Calibrate the touch screen
Enter Android system
Firmware upgrade mode
A6V10445442
_en--_a
2015-06-30