Table of Contents
Advertisement
7.21 Device Preset
Click "Preset" in the menu bar of the main interface of the software, and the device preset interface in Figure 7.21 will
pop up.
Figure 7.21 Device Preset interface
As shown in the above picture, the left side of the preset interface is the gear position, among which "0 automatic gear"
is the system gear position, which automatically saves all parameters; "1 (default)" is the default file of the device, which
can only be recalled, and cannot be deleted or overwritten. The parameters will all be restored to the factory default
parameters; other gears can be freely saved, recalled, deleted and other operations.
The function buttons on the right side of the preset interface are as follow:
Save: Save the existing device parameters to the corresponding selected preset.
Recall: Recall the selected preset to the current parameters of the device.
Delete: delete the selected preset parameter.
Clear: Clear all preset parameter records that are not preset by the system.
Set as boot file: Set the selected gear as the boot file, and each time the power is turned on, the boot file will be
automatically called and all the parameters of the preset will be automatically used to work.
Import and preset: Import a single device parameter file in the computer system, and directly overwrite the existing
parameter data.
Export and preset: save the current equipment parameters to the computer system to produce a single equipment
parameter preset file
Import preset package: import multiple preset parameter packages in the computer system
Export preset package: Export the parameters of all gears in the equipment preset to the computer system to produce
multiple preset parameter package files.
7.22 Firmware upgrade
Page 31 / 34
Advertisement
Table of Contents
