Table of Contents
Advertisement
the value of the start control level.
7.4 Input Parametric Equalizer (PEQ)
Double- click in the function button
to pop up the parameter equalizer page as shown in the figure 7.4 below.
The button in the upper right corner
of the module can enlarge this interface for easier debugging.
Figure 7.4 Input equalizer setting module
7.4.1 Function buttons
As shown in Figure 7.4 above, the functions of the top buttons are.
Phase curve: display the phase curve of the current channel.
View: show or hide all balance control points.
Bypass: turn on or off all equalizer EQ of the current channel at the same time
Preset: save all the setting parameters of the equalizer of the current channel to the computer, and recall the channel
equalizer parameters of the computer, which can be called across channels and devices.
Copy: copy the current channel equalizer parameter value, which can be pasted to other similar channels (such as input
channel parameters can only be copied to other input channels).
Paste: used in combination with the copy button to paste the last copied equalizer parameter value to the current
channel.
Reset: reset the equalizer parameters to the default parameter values.
7.4.2 Multi- channel EQ curve display
Page 18 / 34
Advertisement
Table of Contents
