Table of Contents
Advertisement
Figure 7.17 Add Device Interface
7.18 Device Management
Click "Device"- "Device " in the menu bar of the main software interface, and the device management interface shown
in Figure 7.18 will pop up.
Figure 7.18 Device management interface
As shown in the figure above, the device information content displayed on the target device management interface can
be selected in the device list at the top. The device management interface is divided into three parts as follows:
Software information: display the current device's upper and lower computer version number and date information.
Device information: display the current device name and device grouping, among which "device name" can be entered
in the new name and then click the button to save.
Device IP information: If the current device is connected with network information, the IP address, gateway, and MAC
address of the device will be displayed here. The IP and gateway can be modified and click the OK button to save and
restart the device network module, which newly entered network information will take effect immediately.
7.19 Channel name management
Page 29 / 34
Advertisement
Table of Contents
