Device List; Add Device - Phonic i4800 User Manual

Professional audio processor
Table of Contents

Advertisement

After grouping the list of default four groups, directly select the corresponding packet, if the channel list will be added
directly to the channel assigned to the selected group, to remove the optional channel to be removed by clicking the
Remove button
below to add a button that is Can be removed to the channel list.
The parameter list is the parameters that can be adjusted jointly in the grouping list. When the check is ticked, it means
that when the parameters of several channels in the same group are adjusted, other channels will make the same
adjustment at the same time.

7.16 Device list

The device list on the software homepage, as shown in Figure 7.16 below.
Figure 7.16 Device list interface
The above figure
shows the connected device numbers, which are automatically arranged in the order they are
scanned;
is the device name, which can be changed at will, which is convenient for management;
is the factory name (the user cannot modify it); if the connection method is TCP, the factory name will be left after the
connection is connected. The side will display the IP address of the device; if it is in USB mode, it will display USB; if it is
connected in serial port mode, it will display the specific COM port used;
From left to right, it is divided into mute button, disconnect/connect button, and remove device button.
The mute button can directly control the mute of all output channels of the entire device. If the device is online, the
leftmost position will turn green
, The remove button
can be used to remove the device directly in the software.
If you need to debug different devices, you can click to select the target device, and the function interface will switch to
the device function page.

7.17 Add device

Click "File"- "New Device" in the menu bar of the main software interface, and the following Figure 7.17 Add Device
Interface will pop up. Select the virtual device model to be added and add it to the device list. Note: The virtual device
will not connect to the real device.
Page 28 / 34

Advertisement

Table of Contents
loading

This manual is also suitable for:

I3600

Table of Contents