Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Chord MOJO 2
Summary of Contents for Chord MOJO 2
- Page 1 CHORD MOJO 2 PRODUCT GUIDE...
-
Page 2: Before Powering On
– A MicroUSB to USB type A cable Before Powering On Before using the Mojo 2, charge it fully via the MicroUSB port that has the battery icon over it. When the Mojo 2 is fully charged, the battery status light will be blue. -
Page 3: Battery Status
Battery Status Charging Status Battery Life When you are finished charging the device, the battery status light will remain blue when it’s powered on while unplugged from the charger. -
Page 4: Digital Inputs
Whether you are using a computer, phone, tablet or any other device to play back your music, you will be using the digital inputs of the Mojo 2. The Mojo 2 can also be used wirelessly with the Chord Poly. This will be covered in more detail in the Poly section of this document. -
Page 5: Safety And Maintenance
Keep the Mojo 2 from direct contact with water or other liquids. – Only clean the Mojo 2 with a microfiber cloth. – Attempting to open, dismantle, or internally apply third-party devices to the Mojo 2 will invalidate your warranty. Register your Mojo 2 via the Chord Electronics website. -
Page 6: Front Panel Controls
Front Panel Controls The Mojo 2 operates via a set of glass marble buttons that change color to display current setting status. From right to left, you have: The Power Button. Turns the device on and off. The ‘+’ Button. Increases the volume when not in a menu. When the volume is set to the maximum, pressing this button again will enable High Gain mode. - Page 7 Menu Button Cont. When the Menu button is off, the device is in Low Gain Mode with volume controls enabled. When the Menu button is glowing white the device is in High Gain Mode with the volume controls enabled. This is considered the main menu and the device will auto return to this menu after sitting for awhile in a different menu This does not apply to Lockdown Mode, which locks the device.
- Page 8 Equalization Equalization is the process of adjusting different audio frequencies to get a desired effect from your audio equipment. A common example of this would be “bass boost” mode on an amplifier. This setting boosts the lower frequencies to enhance the presence of the bass when this setting is active. Along these lines, if you were to press ‘+’...
- Page 9 EQ steps represented by color. Lockdown Mode This mode turns off all other buttons, locking in your settings to what they where when you entered “lockdown mode.” When the menu button glows purple the device can enter “Lockdown Mode.” While the menu button glows purple press both the ‘+’...
- Page 10 Using the Mojo 2 with the Poly If you already have the Poly (with the updated 3.0 firmware!), it will plug and play directly with the Mojo 2 just like it did with the original Mojo. No other updates are needed.
- Page 11 Make sure your device is connected to the same network as your mobile device! You can check this by opening up the GoFigure app on your device and make sure that it is connected to your Chord streamer. Download an MPD (music player daemon) client app on your device.
Need help?
Do you have a question about the MOJO 2 and is the answer not in the manual?
Questions and answers