Chord 2go Get Started

Chord Electronics
2go Information Card v1.0
Get started with 2go Get started with 2go
1.0 1.0
Before initiating playback
with 2go, prepare its battery
for the optimum performance by giving it
a full charge.
Separate 2go from Hugo 2 and connect a
suitable charger capable of delivering at
least a 2-amp current (such as Hugo 2's)
to 2go's charger input; charge for six
hours.
REGISTER PRODUCT
Register your Chord Electronics product now and take the first important step to protecting your investment. Our simple form only takes sixty
seconds to complete and helps us to provide you with the best possible after sales support.
First name Last name
Email
Product
Product serial number
3.0 3.0
3.1 Before attaching 2go to
Hugo 2, you must perform
the following step to avoid damage.
Take both locating screws from the
package and carefully thread them into
the holes marked right, thumb-tight.
3.3 To prevent damage to the connectors,
you must 'lock' both devices together.
Locate the small screws at the top and
bottom of 2go and insert the provided
Allen key. Gently tighten, never using
excessive force.
1//2

Charging

Charging
2.0 2.0
To document your purchase
and gain the best service
experience, we recommend you register
2go. Peace of mind can be achieved in
under one minute! Simply visit the
following link:
chordelectronics.co.uk/register-product

Connect

Connect
3.2 Carefully slide 2go onto the locating
screws installed on Hugo 2.
Use gentle pressure (not excessive force)
to align the Micro USB sockets and slot
the two products together.

Register

Register