All manuals and user guides at all-guides.com READ FIRST! Important Safety Precautions! 13. Unplug this apparatus during When installing an outside antenna lightning storms or when unused for system, extreme care should be long periods of time. taken to keep from touching such power lines or circuits, as contact 14.
All manuals and user guides at all-guides.com THANK YOU FOR CHOOSING JBL For more than 50 years, JBL ment that you expected – and This enables us to keep you has been involved in every that when you think about pur-...
All manuals and user guides at all-guides.com DOLBY* DIGITAL OR DTS ® (OR OTHER DIGITAL SURROUND MODE) CONNECTION IMPORTANT: Make sure that the subwoofer from possible the LFE/Normal toggle switch damage. 4 is in the “LFE” position. This Connect this jack to the LFE will bypass the subwoofer’s output or subwoofer output on normal low-pass filter,...
Page 5
All manuals and user guides at all-guides.com DOLBY PRO LOGIC (NON-DIGITAL) – SPEAKER LEVEL Use this installation method for Dolby Pro Logic applica- tions (not Dolby Digital, DTS or other digital processing), where the receiver/processor does not have a subwoofer output, or a volume-controlled preamp (line-) level output: Connect your receiver or...
All manuals and user guides at all-guides.com OPERATION Power Move the Master Power switch If you will be away from home used, switch the Master Power 3 to the “On” position to use switch 3 to the “Off” position. for an extended period of time, the L8400P/230 subwoofer.
All manuals and user guides at all-guides.com Phase Control The Phase Control 5 deter- bass output at the listening you happen to rearrange your mines whether the sub- position. listening room and move your woofer’s pistonlike action speakers, you should experi- Remember, every system, room moves in and out in phase with ment with the Phase switch in...