Part
Door-Lock S/W
Leakage Sensor
(OPTION)
20 _ Disassembly and Reassembly
Figure
Description
1. Open the Door. Remove the Wire.
Diaphragm from The Front Frame.
For easier disassembly, remove
the spring from the lower part of the
Diaphragm with a (-) screwdriver.
Use a Longnose plier and remove it
slowly in one direction to prevent any
damage being caused.
2. Remove the 2 screws.
3. Remove the screw holding the Door-Lock
S/W. Remove the Door-Lock S/W. Remove
the connection wire.(Remove the connector
after releasing it by pressing the catch.)
1. Disconnect two wire connectors.
2. Remove the eight screws holding the
bottom of the FRAME-FRONT.
3. Remove the 2 screws.