Samsung WW7 J5 Series Service Manual page 18

Part
Water Supply valve
Water Level Sensor
16 _ Disassembly and Reassembly
Figure
Water valve Noise filter
Sensor pressure
Description
1. Separate the Assy Cover-Top.
2. Separate the water supply valve wire.
3. Remove the screws holding the water
supply valve.
1. Separate the Assy Top-Cover.
2. Disconnect the wire between the
PRESSURE HOSE and the water level
sensor for repair / replacement.
3. Push the clip of the water level sensor
behind the sensor to one side of the frame
and pull it out to remove it.