Leupold GX-2c Operating Instructions Manual page 19

as accurately as possible . If no club distance
is input, the Club Selector will automatically
default to the preset distances (130 yards
for an 8-iron, 150 yards for a 6-iron, and 170
yards for a 4-iron) . In addition to the striking
distances, the temperature and altitude at
which these distances were measured must
be input following the distance input process .
By entering the environmental conditions in which the specific
distances were obtained, the Club Selector will be able to adjust
the recommended iron according to the current conditions .
TO INPUT THE STRIKING DISTANCE OF THE 8, 6 AND 4-IRON:
NOTE: Though we strongly recommend inputting the specific
distances obtained with each of the irons mentioned above,
the specialized algorithms used by the GX-2c will make logical
assumptions about the remaining club(s) if specific distances are
not known for one or more of the remaining clubs. By inputting
your hitting distances, you will customize the rangefinder to your
game. Leaving the GX-2c in default mode will achieve typical
variances of +/- 1 club length.
Reminder: You cannot input a distance value less than or equal to
the previous club. For example, if you choose 155 yards for your
8-iron, the lowest available distance for your 6-iron will be 160 yards.
16
M
Y
in
cm
ft