TP-Link TD-W8961N User Manual page 74

Now: Click OK to keep your settings.
2. Verify the network connection
Now, you can run the Ping command in the command prompt to verify the network connection.
Please click the Start
and press Enter. Type

If the result displayed is similar to the screen below, the connection between your PC and
the router has been established.

If the result displayed is similar to the screen shown below, it means that your PC has not
connected to the router.
menu on your desktop, select
ping 192.168.1.1 on the following screen, and then press Enter.
run tab, type cmd
71
User Guide
or command in the field