TP-Link TD-W8961N User Manual page 46


Virtual Circuit: Enter Virtual Circuit Index that you plan to setup for the NAT function.

NAT Status: This field shows the current status of the NAT function for the current VC.
You can go to the previous screen to activate the function.

Note:
For VCs with single IP, they share the same DMZ and Virtual servers; for VCs with multiple IPs,
each VC can set DMZ and Virtual servers. Furthermore, for VCs with multiple IPs, they can
define the Address Mapping rules; for VCs with single IP, since they have only one IP, there is
no need to individually define the Address Mapping rule.
4.3.3.1 DMZ
Go to Advanced Setup
A DMZ (demilitarized zone) is a host between a private local network and the outside public
network. It prevents outside users from getting direct access to a server that has company
data. Users of the public network outside the company can access to the DMZ host.

DMZ Host IP Address: Enter the specified IP address for DMZ host on the LAN side.
4.3.3.2 Virtual Server
Go to Advanced Setup
following screen.
The Virtual Server is the server or server(s) behind NAT (on the LAN), for example, Web server
or FTP server, which you can make visible to the outside world even though NAT makes your
whole inside network appear as a single machine to the outside world.
→ → DMZ, you can configure the DMZ host in the following screen.
NAT
→ →
NAT Virtual Server, you can configure the Virtual Server in the
43
User Guide