Idmed ToFscan Quick Start
Hide thumbs
Also See for ToFscan:
- User manual (28 pages) ,
- Service manual (28 pages) ,
- Quick start (2 pages)
Advertisement
Quick Links
M O D E S
1
TOF /
(TOF Auto)
•
TOF ratio T4/T1 (%)
•
TOF count (x/4)
•
Responses amplitude graph.
•
Interval every 15s., 30s., 1min., 2min., 5min.
and 15min
2
ATP (Automated TOF/PTC)
The ATP is an automated mode that enables the measurement of light,
medium, and deep block of the patient.
The ATP adapts automatically TOF and PTC measurements depending on the
patient level of neuromuscular block.
To find the ATP, go to the PTC menu and select ATP.
Press and hold the wheel button for 2 seconds to start the mode. There are no
other actions required thereafter.
To stop the ATP, press the wheel button and the device will automatically
interrupt the mode.
Always read the instruction manual before use.
ToFscan and IDMED are registered trademarks owned by IDMED SAS.
Ref: TOF-QS-V2-EN - Revision : 04/2021
w
w
w
.
i
d
Follow us
m
e
d
.
f
r
QUICK START
Advertisement
Related Manuals for Idmed ToFscan
Summary of Contents for Idmed ToFscan
- Page 1 To stop the ATP, press the wheel button and the device will automatically interrupt the mode. Always read the instruction manual before use. ToFscan and IDMED are registered trademarks owned by IDMED SAS. Follow us Ref: TOF-QS-V2-EN - Revision : 04/2021...
- Page 2 Press the wheel button to switch on Position the splint at the last phalanx of the thumb closely following the U-shape of the hand. Connect the sensor cable to the ToFscan Check displayed information Connection of the sensor (green = connected)
Need help?
Do you have a question about the ToFscan and is the answer not in the manual?
Questions and answers