Table of Contents
Advertisement
Canon:
IXY300a, S330, IXUS 330, A200, A100, IXY320, IXY200a, S230, S200,
IXUSv2, IXUSv3, IXY D30, SD100, IXUS II, IXY400, S400, IXUS400
Digital Camera Setting Example No. 4 (Canon A20)
(And for cameras not having settable ISO Sensitivity or Aperture Value, and with Aperture Value not
visible in LCD display)
1) Set Mode Dial to Manual Mode.
2)
Push Flash Set Button to set Flash
Mode to ON.
5) As necessary, push Exposure / White
Balance Button once, then Macro /
Infinity
Button,
Self-Timer
Button,
Compensation and then push Exposure
/ White Balance Button twice to fix setting.
6) Confirm above settings in LCD Monitor.
7) From the camera Manual Specifications page check the image sensor's sensitivity range.
ISO 100 – ISO 150
8) From the lens front or the camera Manual Specifications page, check the widest aperture value,
or the settable aperture range.
Widest Aperture at Wide Setting:
Widest Aperture at Tele Setting:
Below are some other cameras requiring similar settings. For details of making such settings,
refer to your camera manual.
Olympus:
C900Z, D-400Z, C-2, Brio 230, C-1 Zoom, C-2 Zoom, Brio Zoom 150, Stylus
300, Stylus 400, u-10 Digital, u-20 Digital, u-300 Digital, u-400 Digital, X-200,
C-350Z, D-560Z
Canon:
A10, IXY300, S300, IXUS300
Sony:
DSC-P1
Using another external strobe as a slave strobe
When configuring another external strobe to use as a slave strobe in addition to the D-180, please
refer to the instruction manual for the other strobe and set it to Slave Mode. It may also be
necessary to adjust the camera's ISO sensitivity, shooting mode and exposure compensation and
the D-180's flash output compensation.
INON D-180 Manual
Version 1.
October 4, 2003
Copyright 2002, 2003 by INON America, Inc. All rights reserved.
Continuous
/
set
Exposure
Exposure
Compensation
Manual Mode
Flash Mode ON
A20 LCD Monitor Display
f/2.8
f/4.8
33
Widest
Aperture (W-T)
A20 Lens Front
Advertisement
Table of Contents
