Table of Contents
Advertisement
Digital Camera Setting Example No. 1B (Olympus C-5050 Zoom)
1) Set Mode Dial to either A (Aperture Priority) or M (Manual), push the "OK/MENU" Button,
and push the camera's Arrow Pad control to RIGHT to enter "MODE MENU".
2)
In the CAMERA Tab, set ISO to "100".
3)
If using the internal strobe in "Slave Mode", in the CAMERA Tab choose FLASH and then
"Slave", and push the camera's Arrow Pad control to RIGHT. Then push the Arrow Pad UP
or DOWN from (1) to (10) to select a flash intensity value. (When there is not much ambient
light, or for general underwater conditions it is possible to trigger the D-180 using the smallest
(1) flash intensity.)
Note: When the internal strobe is set to Slave Mode, the Master Strobe's (i.e., the camera's
internal strobe) light adjustment method becomes R-M, and it is therefore necessary to set the
D-180 Advanced Cancel Circuit to OFF. See Page 34 for instructions on how to set the
Advanced Cancel Circuit.
4) Push OK/MENU Button to complete this setting.
5)
Push Flash Mode Button one or more times to set Fill-in-Flash.
6)
Turn the Jog Dial to select your desired Aperture Value. When the Shooting Mode is A
(Aperture Priority) or M (Manual), push the Exposure Compensation Button while turning the
Jog Dial to make these settings.
7)
As necessary, while pushing the Exposure Compensation Button, turn the Jog Dial to set
Exposure Compensation in Aperture Priority Mode to adjust Aperture; and turn the Jog Dial in
Manual Mode to adjust Shutter Speed for Exposure Compensation.
8)
Confirm these settings in the LCD display.
Below are some other cameras requiring similar settings. For details of making such settings,
refer to your camera manual.
Olympus:
C-3040Z, C-3000Z, C-2020Z, C-3040Z, C-2040Z C-4000, C-4100, D-40Z,
C-50AZ, C-750/740
Canon:
S50, S45, S40, S30, A70, A60, A40, A30, G2, G3, G5
Nikon:
CP880, CP885, CP900, CP990, CP995, CP4300, CP4500, CP5000, CP5400,
CP5700
Sony:
DSC-F707/717
Digital Camera Setting Example No. 2 (Nikon E800/CP800)
(And for cameras having settable ISO Sensitivity, but not settable Aperture Value, and with
Aperture Value visible in LCD display)
1) Turn Mode Dial to MREC and push MENU Button to bring up Shooting Menu.
INON D-180 Manual
Version 1.
October 4, 2003
Copyright 2002, 2003 by INON America, Inc. All rights reserved.
31
Advertisement
Table of Contents
